Chongqing Holroyd Precision Rotors Manufacturing Co., Ltd
No. 6 Jiangxi Road, Nan'an District, Chongqing, China.
Thank you for coming to Holroyd Precision Rotor's official
website. For any enquires please contact us.
+86 23 62610818
The harm of main engine of screw air compressor without overhaul
As the core component of the screw air compressor, the main engine is in a high speed state during the whole work process. As time goes on, the bearings of the main engine will inevitably wear, and the gap between the screw and the main shell and the front and rear surfaces will also change. At this point, the main engine of the air compressor needs to be repaired. At this time, if you do not repair the host, it will lead to the following consequences:
Screw compressor head expires overhaul
First, endanger the electrical system: This is because the operation load increases, resulting in the whole system power supply voltage and current rise, which is likely to lead to the burning of the electrical system.
Two, exhaust attenuation: the gap between the main engine and accessories increases, will lead to the efficiency of the air compressor serious decline, so that the amount of exhaust attenuation, and even affect the quality of compressed air.
Three, the host "locking": This is not the fault of the common host "locking", the cause of the failure is not timely repair because of nose. In the host "locking" fault the cost is much higher than the cost of the overhaul of the die.
Four, the replacement cycle related components significantly shortened: This is because the head is not maintenance will increase due to component wear, wear is increased obviously will lead to the relevant parts and shorten the service life of lubricating oil, with shorter replacement cycle.
The importance of screw air compressor main body is self-evident, its maintenance should pay more attention to. Screw air compressor main engine will not happen any fault, but if the fault is more trouble. Therefore, the maintenance and maintenance of air compressor should be well done, and the problems should be solved in time to prevent it.
The basic items needing attention when disassembling screw machine parts
Upgrading of single screw plastic extruder